Branch Take Off 250Ø - BTOK BASE (Add 2 Spigots)

BTOK KoolDuct Branch Take Off (90deg) R1.0 Insulation Rating
BASE BRANCH TAKE OFF WITH BASE SPIGOT OF 250Ø
Add exit spigot and branch spigot to your order

HOW TO ORDER
1: Order the base branch.
2: Select and purchase the spigots you require on your exit branch and take off branch
4: In the notes let us know the configuration of the spigots

i.e
Base Branch is 250Ø (Comes on BTOK do not order)
Exit Spigot is 1 x 250Ø Spigot either normal or dampered
Branch is 1 x 250Ø Spigot either normal or dampered

Fabricated from Kingspan KoolDuct panels, pre-insulated plenum boxes are light weight and easy to install, as no extra lagging is required. 

Operating Temperature Limits -26°C to +85°C
Material R-value 22 mm = R1.0

Manufactured by Airflow - The HVAC Shop
Manufacture time is normally 2-3 days from confirmation.

The fabrication of ductwork from The Kingspan KoolDuct® System is accomplished by following a standardised procedure, which incorporates the following processes:
● cutting bevelled edges at different angles along the outlines to form folded or butted mitre joints,
● assembling the cut pieces into the desired shape and securing into place with Adhesive 
● taping joints and exposed insulation edges with a protective and durable aluminium foil vapour barrier tape;
● reinforcing ductwork sections and fittings, if required;
● sealing the internal side of all mitre joints with Silicone Sealant;
● fixing spigots as required;
● inspecting finished branches to ensure that it is fit for the purpose intended.